Hochiki DCD-1E-IS Conventional Intrinsically Safe Heat Rise and Constant Temperature Detector II 1G EEx ia IIC T5 Tamb=55 °C (Excluding Base)

Intrinsically safe Heat Detector

Hochiki DCD-1E-IS self-confident heat detector is designed for use in hazardous areas.

Features

HE Connection point for parallel warning lamp

HE It has no electronic parts.

HE Twin fire LEDs provide 360° viewing.

HE ATEX certification: II 1G EEx ia IIC T5 (Tamb = 55oC)

HE Approved by VdS and LPCB

DCD-1E-IS Intrinsically Safe Conventional Heat Detector

DCD-1E-IS is an intrinsically safe conventional rate of rise heat detector designed for use in hazardous areas.

Features:

• Two Fire LEDs:Provides 360° vision.
• Mounting Base Without Electronics:Mounting base without electronics.
• Remote Display Output:Output for remote indication signal.
• ATEX Classification:II 1G EEx ia IIC T5 Tamb=55 °C, suitable for installation in Category 1 areas (including lower categories).
• Color Option:Also available in white.
• Approvals:Approved by LPCB and GL.
• SIL Level 2 Approved Variants:Available.

Technical Specifications:

• Order Codes:
  • DCD-1E-IS (Ivory)
  • DCD-1E-IS(WHT) (White)
  • DCD-1E-IS/SIL (SIL Level 2 Certified)
• Working Voltage:15 – 30 VDC
• Standby Current (typical):50 µA
• Maximum Current in Alarm:50mA
• Operating Temperature Range:-10°C to +55°C
• Storage Temperature Range:-30°C to +70°C
• Maximum Humidity:95% RH - Non-condensing (at 40°C)
• Ingress Protection Degree:IP63
• Color / Case Material:Ivory or White/ABS
• Weight (g) / Diameter (mm) / Height (mm):97 / Ø 100 / H 40
• Compatible Base:YBN-R/4(IS)
• Mounting Centers (mm):48~74

Approvals:

• ATEX Certificate:BAS01ATEX1021X
• LPCB Approval
• Germanischer Lloyd (GL)

With its intrinsic safety and reliable performance, DCD-1E-IS is an ideal choice for fire safety solutions in hazardous areas.